copper migration

The FAA Ground Stop Is the Copper Story Your Customers Need to Hear

Every Verizon seller has had the conversation. You raise copper retirement, the customer nods, and the follow-up gets pushed to next quarter. Even though copper migration is becoming more important, their lines still work, so why rush?

On Friday, November 13, the country got an answer. The Federal Aviation Administration stopped every departing flight in the United States for roughly four and a half hours, grounding more than 12,000 flights and stranding more than a million passengers. According to the FAA and Transportation Secretary Sean Duffy, the cause was a telecommunications failure that surfaced in the middle of a forced move from copper to fiber (Deseret News, November 16, 2026).

In short, that is the story your customers need to hear, and it is the reason to call them this week.

What Happened at the FAA

The FAA’s network contractor was upgrading a radar site in Amarillo, Texas, and a radio communications site in El Dorado, Arkansas, moving them off aging copper lines and onto fiber with new routers. Secretary Duffy was blunt about why: the telecom provider said the copper “can’t be used anymore,” so the FAA had to make the change.

After the cutover, the system became unstable. Data flooded other equipment, and 17 of the country’s 22 regional air traffic control centers saw instability in radar and communications. Duffy pointed to the root issue: much of the FAA’s infrastructure still runs on time-division multiplexing, a 1980s copper-era technology built around fixed, predictable timing. When those legacy systems met modern packet-based equipment, they could not handle the change.

The investigation continues, but three facts are already clear, and every one of them applies to your customers. The copper migration was not on the FAA’s schedule. The failure happened at the handoff between old and new. And the impact reached far beyond the site being upgraded.

Copper Migration Can’t Wait: The Clock Is Not Your Customer’s

The FAA is not alone in being told its copper is going away. The regulatory path to retirement has shortened dramatically this year.

The FCC cleared the way. In March 2026, the Commission adopted rules that streamline the Section 214 discontinuance process, give carriers blanket authority to grandfather copper-based voice and low-speed data, and preempt state and local rules that would hold carriers on legacy networks after federal approval (FCC, March 26, 2026).

Verizon’s retirement footprint is expanding. In September, Verizon filed to discontinue copper voice service across ten markets: California, Connecticut, Illinois, Maryland, Massachusetts, Michigan, New York, Pennsylvania, West Virginia, and Washington, D.C. On November 19, the FCC accepted the filing. As a result, it is on track to be deemed granted on December 20 unless the Commission acts (PCMag via Yahoo, November 19, 2026).

Meanwhile, the rest of the industry is moving too. AT&T began discontinuing copper phone service in designated areas in mid-November, and other incumbent carriers are working through their own retirements (Cord Cutters News).

Verizon has committed to working with customers on qualifying replacements before service ends. But a carrier notice is not a migration plan. Roughly 750,000 homes and businesses in that nine-state filing alone are still on copper, and the businesses among them run far more than phones on those lines.

Why Your Customers’ Businesses Are Exposed

A copper migration done under pressure is where things break, and the lines customers forget about are the ones that hurt most when they fail. They fall into a few categories.

Life-safety devices are the sharpest risk. Fire alarm panels, elevator emergency phones, and security systems were designed around copper’s steady timing. Digital networks deliver traffic in packets with variable latency and jitter, and many of these devices reject a replacement line that does not behave the way they expect, just like the FAA’s legacy systems.

Operations and compliance are close behind. A fire panel that cannot reach its monitoring center can mean a failed inspection or a fire watch. A dead elevator phone can take an elevator out of service. Point-of-sale, gate, fax, and modem lines can stop working with little warning.

And the timeline compresses fast. A multi-site customer may have hundreds of copper lines spread across locations, many of them undocumented. Inventorying, testing, and cutting them over takes time they may not have once a notice arrives.

For your customer, a failed migration will not ground a nation’s airlines. But it can close a store, fail an inspection, or put a life-safety system offline, and customers will remember it as the moment their carrier relationship let them down. Or as the moment you helped them avoid it.

How to Use the FAA Story With Customers

Here is a simple way to open the conversation:

“You may have seen the FAA ground every flight in the country. It happened during a copper-to-fiber move the FAA was told it had to make. Your copper is on the same path. Let’s get a plan in place now, on your schedule, before a notice sets it for you.”

From there, keep it simple. Start the copper migration with an inventory: ask how many copper lines they have and what is on them, especially alarms, elevators, and other life-safety equipment. Name the risk at the handoff: the danger is not only in the old wire, it is whether their devices work on the new network. Then bring in MarketSpark early, because one introduction covers the entire copper footprint, from assessment through cutover.

Why MarketSpark Is the Copper Migration Partner for the Handoff

MarketSpark was built for exactly the failure point the FAA hit. Through One Connect, MarketSpark runs the entire copper migration in one coordinated motion: life-safety lines move to Critical Connect, and business voice moves to Verizon One Talk.

What sets MarketSpark apart is what happens at the device. Analog equipment was built for the timing behavior of copper. MarketSpark’s patented latency management technology reproduces that timing over LTE, so fire panels, elevator phones, and alarm systems accept the new line the first time, without reprogramming or panel replacement.

Many POTS replacement solutions simply pass analog signals over a cellular connection and leave the device to cope with variable latency. That is where failed signal tests, truck rolls, and customer escalations come from. MarketSpark addresses the timing problem directly, delivering a 99% device acceptance rate compared with roughly 80% across other approaches. MarketSpark manages and monitors Critical Connect lines 24/7, with battery backup.

For you, that means one introduction, one deal registration, and one contract for the whole copper footprint. It means installs that finish on schedule, without escalations that land on your desk. And it means a stronger customer relationship, because you brought the plan before the problem.

Make the Call This Week

Copper retirement used to be a slow, distant conversation. It is not anymore. The FAA learned what happens when the copper deadline arrives before the plan does. Your customers do not have to. Register your copper accounts with MarketSpark today. We will map your customer’s lines, flag life-safety risks, and build a migration plan that keeps their business running, and keeps them with

privacy options button
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful. You can read more information about our general Privacy Policy

Our Chat Bot plugin stores data in our Salesforce.com instance. If you do not wish for your conversation record to be stored in our Salesforce.com instance, please do not interact with our Chat Bot.